Accessories

Topseller

Combination fitting

For membrane-covered sensors Basic type: 202811

The product is designed for mounting several electrochemical sensors. It is typically used for monitoring the disinfection of drinking and swimming pool water as well as slightly polluted process and cooling water.

For electrochemical sensors
Incl. flow monitor
Temperature 0 to 60 °C and 0 to 90 °C

Pneumatic retractable fitting

For pH and redox electrodes Basic type: 202823

Pneumatic retractable fittings are used wherever sensors are exposed to exceptional loads. These can be applications with heavy pollutants or precipitation as well as special process conditions (such as sterilizing capability and hygienic applications).

For pH electrodes
Installation of 225 × 12 mm sensors
For sensors with a Pg 13.5 connection

Impedance converter

For pH or redox combination electrodes Basic type: 202995

The impedance converter transforms the high-impedance signal of the pH electrode (up to 1,000 MOhm) into a low-impedance signal (1 kOhm). The use of an impedance converter can also be advantageous in conjunction with a metal electrode.

Temperature -10 to +60 °C
Output: U0 ≤ 6 mV
Input: Re ≥ 5 x 10^1 Ω

Portable digital measuring device

For pH, redox, and conductivity Basic type: 202710

This battery-operated, manual measuring device determines the pH value, the redox potential, the temperature, and the conductive conductivity of water and aqueous media. They are used in such places as laboratories in industrial plants, the wastewater sector, aquaristics, and on fish farms.

pH: 0 to 14
Temp.: -100 to +250 °C
Redox: -1999 to +2000 mV

Flow fittings

For pH, redox, and conductivity sensors Basic type: 202810

Flow fittings are designed for mounting electrochemical sensors (e.g. pH and redox combination electrodes, glass conductivity cells, compensation thermometers, etc.) with a Pg 13.5 screw-in thread and a 120-mm insertion length.

For pH values, redox, and conductivity
Installation of 120 × 12 mm sensors
Up to 3 sensors with a Pg 13.5 connection

Immersion fittings

For pH and redox electrodes Basic type: 202820

Immersion fittings are designed for mounting electrochemical sensors (e.g. pH and redox electrodes, glass conductivity cells, etc.) with a Pg 13.5 screw-in thread and a 120-mm insertion length. Fitting types for 1 to 3 sensors are available.

For pH and redox electrodes
Installation of 120 × 12 mm sensors
Up to 3 sensors with a Pg 13.5 connection

Manual retractable fittings

For pH and redox electrodes Basic type: 202822

The primary applications areas of retractable fittings include pH measurements in closed-loop circuits or measurements in the supply and return lines for wastewater treatment plants. The retractable fitting can also be installed in container side walls, which allows removal of the sensor without needing to drain the container beforehand.

For pH and redox electrodes
Installation of sensors up to a max. of 225 × 12 mm
For 1 sensor with a Pg 13.5 connection

Stainless steel process fittings

For pH and redox electrodes Basic type: 202825

These fittings are intended to protect and fasten pH and redox electrodes. They can be mounted directly into existing stainless steel pipe systems or in container walls.

For pH and redox electrodes
Installation of sensors up to a max. of 120 × 12 mm
For sensors with Pg 13.5 connection

Simulators and calibration adapters

For pH, redox, and conductivity Basic type: 202711

3 adapters for measuring the pH and redox values as well as the conductivity. Product type 10 can be used to check the operational reliability of technical pH and redox measuring equipment. With type 20 measuring amplifiers and connecting cables for electrolytic conductivity.

Cell constants k 0.01 to 10.0
pH values 0 to 14
Redox: ± 414 mV to 59 mV

Lines, connectors, and sockets

For pH, redox, conductivity, and temperature sensors Basic type: 202990

Shielded lines must be used for the connection of pH and redox electrodes, compensation thermometers, and conductivity measuring cells. The lines can be equipped with a corresponding connector or corresponding socket on the sensor as well as on the device.

Various lengths
ø 5 mm
Temperatures up to 75 °C

JUMO Device App

Mobile access to JUMO devices Basic type: 709771

The JUMO Device App provides the user with mobile access to their process data at all times. All current process values as well as the alarm and event list from selected JUMO devices which are networked via Ethernet can be viewed in text form.

IP address/DNS name
Retrieval of event/alarm lists
Scan function for device search

Technical buffer and cleaning solutions

For pH and redox electrodes Basic type: 202950

Buffer, test, and reference solutions, auxiliary electrolytes, and cleaning solutions are used for the following: calibrating technical pH measurement instruments, checking technical redox measurement instruments, as conductivity calibration solutions, as refill electrolytes, or for cleaning silver sulfide.

Various pH values
Redox value 468 mV
Various conductivity values

Accessories for electrochemical sensors