Buy Pt100 and buy Pt1000

Platinum temperature sensors from JUMO are available in numerous versions as well as with different nominal values. They inspire with a high degree of accuracy, long-term stability, and a wide measuring range. The development and production of our Pt100, Pt1000, and Pt500 sensors is based on many years of experience with an annual production of several million, so that our temperature sensors meet even the most special requirements. Buy Pt100 or Pt1000 now or request a sales quotation!

Filter

1

Displays

Sort by

Platinum-chip temperature sensors PCW-S-PtNi

with connection wires according to DIN EN IEC 60751 Basic type: 906135

Platinum chip temperature sensors of the PCW design type belong to the category of temperature sensors that were made using thin-film technology. They are typically used in the following industries: heating engineering, air conditioning technology, ventilation technology, industrial technology, medical and laboratory engineering, white goods, mechanical engineering, and motor and commercial vehicles. The sensors are available as Pt100, Pt500, Pt1000.

For temperatures from -70 to +400 °C
Connection platinum wrapped wire
Standardized nominal values and tolerances

Platinum-chip temperature sensors PCWR-M-AuNi

with connection wires according to DIN EN IEC 60751 Basic type: 906138

Platinum chip temperature sensors of the PCWR design type belong to the category of temperature sensors that were made using thin-film technology. The sensors have connection wires extending to the center of the sensor and are suitable for confined spaces. The sensors are available as Pt100 and Pt1000.

For temperatures from -70 to +500 °C
Gold-plated nickel wire connection
For confined spaces

Platinum-chip temperature sensors PCWRB-L-AuNi

with connecting wires and metallized back cover according to DIN EN IEC 60751 Basic type: 906139

Platinum chip temperature sensors of the PCWRB design type belong to the category of temperature sensors that were made using thin-film technology. The sensors are equipped with a solderable nickel-gold metallization on the back cover. The metal layer enables direct thermal contact with another body via a solder connection.

For temperatures from -50 to +250 °C
Solderable metallized back cover
For confined spaces

PCB-B-Au measuring inserts

with platinum chip temperature sensors of SMD design type according to DIN EN 60 751 Basic type: 906143

Temperature sensors of the PCB-B-Au design type are pre-assembled measuring inserts, which are equipped with platinum chip temperature sensors in SMD design type. The circuit board is connected via gold-plated solder contacts.

Pre-assembled
Standardized nominal values and tolerances
Customer-specific versions

Platinum-chip temperature sensors SMD-L-AuNi

in SMD design type according to DIN EN IEC 60751 Basic type: 906141

Platinum-chip temperature sensors belong to the category of thin-film technology temperature sensors. For example, they are frequently applied in temperature monitoring or compensation circuits, as well as an array of applications in temperature probes. The sensors are available as Pt100, Pt500, and Pt1000.

Gold-plated nickel solder contact
Standardized nominal values and tolerances
AEC-Q200 for selected sensors

Platinum-chip temperature sensors SMDFC-L-AuNi

in SMD design type according to DIN EN IEC 60751 Basic type: 906142

Platinum-chip temperature sensors belong to the category of thin-film technology temperature sensors. Sensors of the SMDFC design type have a single-sided contact for "face down mounting" (flip chip). The sensors are available as Pt100, Pt500, and Pt1000.

Flip chip version
Standardized nominal values and tolerances
AEC-Q200 for selected sensors

Platinum-chip temperature sensors SMDFCB-L-AuNi

in SMD design type (flip chip) with metallized back cover according to DIN EN IEC 60751 Basic type: 906146

Platinum chip temperature sensors belong to the category of temperature sensors that were made using thin-film technology. Sensors of the SMDFCB design type have a single-sided contact (flip chip) and are equipped with a solderable nickel-gold metallization on the back cover. The metal layer enables direct thermal contact with another body via a solder connection.

Solderable metallized back cover
Direct thermal contact
High temperature cycle stability

Platinum-chip temperature sensors PCW-M-AuNi

with connection wires according to DIN EN IEC 60751 Basic type: 906133

Platinum chip temperature sensors of the PCW design type belong to the category of temperature sensors that were made using thin-film technology. They are typically used in the following industries: heating engineering, air conditioning technology, ventilation technology, industrial technology, medical and laboratory engineering, white goods, mechanical engineering, and motor and commercial vehicles. The sensors are available as Pt100, Pt500, Pt1000.

For temperatures from -70 to +500 °C
Gold-plated nickel wire connection
Standardized nominal values and tolerances

Platinum-chip temperature sensors PCW-H-Pd

with connection wires according to DIN EN IEC 60751 Basic type: 906136

Platinum chip temperature sensors of the PCW design type belong to the category of temperature sensors that were made using thin-film technology. They are typically used in the following industries: heating engineering, air conditioning technology, ventilation technology, industrial technology, medical and laboratory engineering, white goods, mechanical engineering, and motor and commercial vehicles. The sensors are available as Pt100 and Pt1000.

Temperature range up to 600 °C
Connection palladium wire
Standardized nominal values and tolerances

Platinum-chip temperature sensors PCW-M-PtNi

with connection wires according to DIN EN IEC 60751 Basic type: 906130

Platinum chip temperature sensors of the PCW design type belong to the category of temperature sensors that were made using thin-film technology. They are typically used in the following industries: heating engineering, air conditioning technology, ventilation technology, industrial technology, medical and laboratory engineering, white goods, mechanical engineering, and motor and commercial vehicles. The sensors are available as Pt100, Pt500, Pt1000.

For temperatures from -70 to +550 °C
Connection platinum wrapped wire
Standardized nominal values and tolerances

Platinum-chip temperature sensors PCWC-A-SnCu

with solderable terminal clamps and epoxy protective coating according to DIN EN IEC 60751 Basic type: 906140

Platinum-chip temperature sensors of the PCWC design type are especially suited for various probes in the heating, ventilation, and air-conditioning industry; the temperature sensor may also be openly positioned in the air flow with nothing surrounding it. The sensors are available as Pt100 and Pt1000.

Protection against moisture and condensation
Standardized nominal values and tolerances
Solderable connection terminals

Technical features at a glance

Standardized nominal values and tolerances according to DIN EN 60751
Flexibility through large measuring range
Excellent measuring accuracy and long-term stability
Patented manufacturing process (SMD)

Good vibration resistance
Available as Pt100, Pt500, or Pt1000
Suitable for demanding applications

Buy Pt100/Pt1000 with connection wires PCW

Wired platinum chip temperature sensors from JUMO are available for various operating temperatures. In the medium temperature range up to 550 °C, standard variants are available with platinum wrapped wire (PCW-M-PtNi design type), which can be further processed using many common joining techniques. We offer you an economical alternative for the temperature range up to 500 °C with connecting wires made of gold-plated nickel wire (PCW-M-AuNi design type), which can also be soldered. The PCW-H-Pd design type is available for demanding applications with operating temperatures up to 600 °C.

PCW temperature sensors for special requirements

The PCWR compact design type has connection wires that lead to the center of the sensor. As a result, it is particularly suitable for confined spaces or special probe designs. The PCWRB variant is equipped with a solderable nickel-gold metallization on the back cover. Direct thermal contact to another body can be established via metallization using a solder connection, as a result of which a fast response time can be achieved. One popular application is calorimetric flow measurement. The PCWC design type offers special protection against moisture and condensation with an epoxy coating. The sensors are ideally suited for sensor probes in the field of heating, air conditioning, and ventilation.

Platinum temperature sensor PCWRB-L-AuNi for fast response times

Buy Pt100/Pt1000: platinum chip temperature sensors SMD

Platinum chip temperature sensors from JUMO in SMD design type are manufactured using a patented production process with a gold-plated nickel layer. As a result, excellent processing results, a high degree of resistance to temperature cycles, and a high degree of storage stability are possible. The solder contacts are completely free of phosphorus, sulfur, or other impurities and provide excellent solder connections. The platinum temperature sensors are optimized for processing in reflow soldering processes.

SMD temperature sensors in 3 designs

The sensors are available in 3 design types by default and differ mainly in the version of the solder contacts. The SMD design type has a contact on the reverse side (wrap-around contact), while the solder contact on the SMDFC design type (flip chip) is on one side. In addition, the SMDFCB variant is available with a solderable, metallized back cover.

Qualification according to AEC-Q200

The AEC-Q200 specifies electrical standards and test procedures for use in the harsh automotive environment. It provides evidence of the reliability and quality of electrical components. Selected SMD sensors from JUMO are qualified according to the standard, so that efforts for further qualification tests at the component level are reduced.

A platinum-chip temperature sensor in SMD design type on a circuit board

For use on assembled printed circuit board

We also offer pre-assembled PCB measuring inserts for temperature sensors. If an application-specific layout is required, we will also be happy to support you with a customized solution for your application. Feel free to contact us!